SeMAX – Semi mechanical Pendistor upgrades


Sunds Fibertech now releases the SeMAXTM family to provide our customers the opportunity to upgrade their Pendistors to Semi mechanical Pendistors. SeMAX includes three different types of upgrades for Pendistors: SeMAX Levelling Roller, SeMAX Flow control and SeMAX Weight control.


SeMAXTM – Semi mechanical Pendistor upgrades will:

  • Reduce power consumption
  • Improve your forming accuracy
  • Reduce amount of scalping
  • Reduce fiber re-circulation
  • Reduce resin consumption
  • Improve weight control
  • Be retrofitted in all types of formers
  • Be easy to install


SeMAX Levelling Roller smoothens out the fiber mat surface by using a levelling roller before the scalper. With SeMAX Levelling Roller you will reduce your fiber re-circulation from 30% to below 5%.


SeMAX Flow control automatically control the vacuum air flow, independent of the pressure drop over the fiber bed resulting in a constant flow over the fiber bed. With the SeMAX Flow control you will reduce your power consumption by 30% on thin board.


SeMAX Weight control automatically control the forming accuracy of the fiber mat underneath the scalper roller. With SeMAX Weight control you will improve your forming accuracy.


For more information contact your local Sunds Fibertech representative.


24.07.2018 Vi söker en ekonomichef

04.07.2018 Service/start-up engineer

29.06.2018 Vi söker en blivande projektledare

04.05.2018 Sunds Fibertech expands further in China to strengthen customer service in world’s largest market

23.03.2018 Vi söker en projektledare

21.03.2018 Vi söker en automationsingenjör

19.03.2018 Vi söker en service- och startupingenjör

02.03.2018 New service concepts for Küsters/Metso Contipress equipment

01.03.2018 Sunds Fibertech is strengthening its Küsters and Metso Contipress Services

27.01.2018 New optimized resin system for improved uptime, panel properties and resin saving

26.01.2018 Respectfully preserving our past, proudly building our future

21.12.2017 We are further strengthen Sunds Ingenjörer by recruiting Mr Jens Schedin

11.12.2017 Arne Wessbladh recruited as Project Director and part of Sunds Fibertech’s management team

 Heating plates for multi opening presses, optimized heat transfer and reliability

28.11.2017 Sunds Ingenjörer utmanar och vinner mark – vi söker mekanik- och elkonstruktörer som vill vara med på vår tillväxtresa

27.11.2017 Sunds Fibertech utmanar och vinner mark – vi söker en projektchef som vill vara med på vår tillväxtresa

05.10.2017 Pressrelease: Sunds Fibertech förstärker företagsstrukturen och öppnar nytt Teknologicenter i Timrå

 Press release: Sunds Fibertech strenghten the company structure and open new technology center

26.09.2017 Sunds Fibertech launching improved chains for Küsters presses

22.09.2017 Phase 1 in Trespa is successfully started up

15.09.2017 Christer Westberg has joined Sunds Fibertech

10.09.2017 Seminar in Linyi, China

07.08.2017 Sunds Fibertech at LIGNA 2017

04.07.2017 New Sales Manager

04.08.2016 SeMAX – Semi mechanical Pendistor upgrades

01.06.2016 Sunds Fibertech at Beijing WMF 2016 – WMA 2016

24.03.2016 Robina Limited has ordered 2 ChainMax to their Kuster Press

14.03.2016 Walter Pichler has joined Sunds Fibertech

21.02.2016 Multi opening press renovation completed for Duratex, Brazil

20.02.2016 Dieffenbacher orders two belt weigh conveyors

25.12.2015 New product launch by Sunds Fibertech

At your service