Guangxi Sunway signed contract with Sunds Fibertech

 

On July 30, 2019, Guangxi Sunway Forest Products Industry Co., LTD. and Sunds Fibertech held a signing ceremony for the contracts of a CleanMAX, PressBooster, PressGuard and EVOfuge in Jiangbin International Hotel, Wuzhou City, Guangxi Province.

 

Ceremony and signing the scene.

 

The leaders from National Bureau of Forestry and Grassland Industry, Chinese Forest Product Industrial Association, Beijing Forestry University and Forest Industry Planning Design Institute, as well as the Leader from Wuzhou Municipal Government, were invited to attend the signing ceremony.

 

The contract covers a major rebuild package for environmental protection upgrade and production line performance improvement. Products including are a CleanMAX –Dryer exhaust gas treatment & Water treatment system, a PressBooster – a mat preheater, PressGuard – press flame detector and mist spray system, as well as an EVOfuge– steam recovery system.

 

Madam Ma Lu – the President of Sunway gave a speech.

 

The President of Sunway Madam Ma Lu gave a speech, Guangxi Sunway is one of the biggest panelboard manufacturers in China, it is also a National Forestry key leading enterprises, high-tech enterprises, national forestry standardization, and demonstrative enterprise, is also a circular economy demonstration enterprises.

 

The company has 3 advanced wood-based panel production lines with an annual total production capacity of 650,000 cubic meters, as well as an annual output of 50,000 tons of formaldehyde and 100,000 tons of resin plant, and has built a raw material forest basement of nearly 6666 hectares. It has 2 wholly-owned subsidiaries and 1 holding company.

 

This new project is a large investment, which is not only a major project to meet international advanced standards and improve the company’s environmental protection level but also an important measure to establish a paragon enterprise for environmental protection of China’s forest products industry.

 

Sunds Fibertech AB, a well-known European wood-based panel equipment and fiber technology company. As a participant and witness of Sunway’s development, SFT has a long-term good cooperation with Sunway.

 

The main project CleanMAX- dryer exhaust wet cleaning system, it is one of the best technology in the world, who uses the unique mist separator technology together with a highly efficient water treatment system.

 

Sunway is looking forward to working with SFT to build a high-quality, good example project in southern China, contributing to the protection of blue sky and white clouds in China, Guangxi, and Wuzhou.

 

Mr. Kenth Eklund – the President of SFT gave a speech.

 

Sunds Fibertech is very grateful to the shareholders and the leadership of Guangxi Sunway Forest Products Industry Co., Ltd. for making important decisions to choose our company – Sunds Fibertech AB as a supplier to build one set of the world’s most advanced environmental protection system in panelboard area. To effectively reduce emissions and protect the blue sky and white cloud in Wuzhou and Guangxi.

 

Sunds Company as machine supplier has luckily participated in the construction of Sunway 1st Particle-board line, the 1st continuous press MDF line, and the 1st HDF line. It is the participant and witness of Sunway Company’s development.

 

After years of development, Sunway Company has built a leading position in the China Panelboard industry area. Now leading by the President Madam Ma, the company has shown new mental outlook, the enterprise has made progress not only in production, management and environmental health, and also the product quality enjoys a good reputation in the world. Now, Sunway company overcomes the obstacles of high investment and will be the first company to build the world most advanced dryer exhaust wet cleaning system in southern China, which made us fully realize that Sunway company always bases itself on the present, focuses on the future, always stands at the forefront and becomes a good example of the industry. The reason why Sunway company can achieve such achievements is because they have a professional team, working hard and responsible spirit to society. Sunway team is the most dedicated, professional and visionary team we have ever worked with. It is the glory of our company to continue to cooperate with Sunway.

 

This cooperation with Sunway company covers all aspects, including energy conservation, emission reduction, production capacity, and quality improvement, production safety, etc. technology and equipment. In which, CleanMAX system is the most advanced system in the world for this industry area. Our system is tailor-made for Sunway HDF line of fiber capacity 38 tons per hour, board capacity 1000m3 per day. After the system put into operation, its emission value is much lower than the emission standard set by China and even lower than that of Europe. The system contains a lot of unique technology, such as: high efficient water spraying system, the highly effective water treatment system, the unique three-layer of mist separator system, can effectively remove the particles, formaldehyde, VOC, nitrogen oxide and sulfur dioxide and other pollutants in the dryer exhaust air, the system not only reduce dry exhaust emissions by as much as 90%, at the same time the cleaning water will be recycled after treatment so avoid the secondary pollution to the environment.

 

The CleanMAX™ system has more than 12 successful references in China and around the world. Sunds are looking forward to working with Sunway to build a high-quality, paragon project in southern China, contributing to the protection of blue sky and white clouds in China, Guangxi, and Wuzhou.

 

Mrs. Su Ying – Vice Mayor of Wuzhou Municipal Government gave a speech.

 

Mr.Shi Feng – Secretary General of Chinese Forest Product Industrial Association gave a speech.

 

The signing ceremony came to a successful conclusion in a friendly atmosphere.

 

For further information, please contact us directly or via your local Sunds Fibertech representative.

NEWS ARCHIVE

15.08.2019 Guangxi Sunway signed contract with Sunds Fibertech

01.08.2019 Dare Danyang successfully started up a mat-pre heater, PressBooster, from Sunds Fibertech

23.07.2019 Customer seminar in Yunnan XZX Panelboard Co., Ltd

10.07.2019 Weilibang Hubei successfully started up a mat-pre heater, PressBooster, from Sunds Fibertech

06.06.2019 LIGNA fair 2019

15.05.2019 SundsLine – make fiber, think board

03.04.2019 Sunds Fibertech launches new sifting technology

15.03.2019 Sunds Fibertech to rebuild Küsters press at Roseburg Forest Product Pembroke MDF, Canada

12.03.2019 Sunds Fibertech delivered more than 2000 meters of Küsters chains in 2018

12.02.2019 Successful performance of patented mechanical steam separators (EVOfuge™), in Eastern Europe and Anhui Jiahe, China

01.02.2019 Sunds Fibertech and Hebei Xinxin Wood sponsors of governmental seminar

21.12.2018 Successful startup of Sunds Fibertech’s mat pre-heater (PressBooster) in Guangxi Sunway Forest Products Industry, China

10.12.2018 12 months with Sunds Fibertech’s airCleanMAX – best available wet scrubber technology on the market

23.10.2018 Sunds Fibertech is strengthen its refiner service by employing Patrik Karlsson

24.09.2018 Lena Sandberg recruited as CFO for Sunds Fibertech Group

18.09.2018 WMF 2018 in Shanghai

24.07.2018 Vi söker en ekonomichef

04.07.2018 Service/start-up engineer

29.06.2018 Vi söker en blivande projektledare

04.05.2018 Sunds Fibertech expands further in China to strengthen customer service in world’s largest market

23.03.2018 Vi söker en projektledare

21.03.2018 Vi söker en automationsingenjör

19.03.2018 Vi söker en service- och startupingenjör

02.03.2018 New service concepts for Küsters/Metso Contipress equipment

01.03.2018 Sunds Fibertech is strengthening its Küsters and Metso Contipress Services

27.01.2018 New optimized resin system for improved uptime, panel properties and resin saving

26.01.2018 Respectfully preserving our past, proudly building our future

21.12.2017 We are further strengthen Sunds Ingenjörer by recruiting Mr. Jens Schedin

11.12.2017 Arne Wessbladh recruited as Project Director and part of Sunds Fibertech’s management team

 Heating plates for multi opening presses, optimized heat transfer and reliability

28.11.2017 Sunds Ingenjörer utmanar och vinner mark – vi söker mekanik- och elkonstruktörer som vill vara med på vår tillväxtresa

27.11.2017 Sunds Fibertech utmanar och vinner mark – vi söker en projektchef som vill vara med på vår tillväxtresa

05.10.2017 Pressrelease: Sunds Fibertech förstärker företagsstrukturen och öppnar nytt Teknologicenter i Timrå

 Press release: Sunds Fibertech strenghten the company structure and open new technology center

26.09.2017 Sunds Fibertech launching improved chains for Küsters presses

22.09.2017 Phase 1 in Trespa is successfully started up

15.09.2017 Christer Westberg has joined Sunds Fibertech

10.09.2017 Seminar in Linyi, China

07.08.2017 Sunds Fibertech at LIGNA 2017

04.07.2017 New Sales Manager

04.08.2016 SeMAX – Semi mechanical Pendistor upgrades

01.06.2016 Sunds Fibertech at Beijing WMF 2016 – WMA 2016

24.03.2016 Robina Limited has ordered 2 ChainMax to their Kuster Press

14.03.2016 Walter Pichler has joined Sunds Fibertech

21.02.2016 Multi opening press renovation completed for Duratex, Brazil

20.02.2016 Dieffenbacher orders two belt weigh conveyors

25.12.2015 New product launch by Sunds Fibertech

At your service