New airCleanMAX exhaust cleaning technology

– Meets all global environmental regulations at much lower investment, operation and maintenance cost than a WESP technology.

Sunds Fibertech has two models of dryer exhaust cleaning systems tailor-made for MDF production, the airCleanMAX10 is the high-end system meeting highest global environmental regulations and awarded as best available technology. This system removes dust emission to below 10 mg/Nm3 and formaldehyde below 5 mg/Nm3. The airCleanMAX30 system has the same basic set up as airCleanMAX10 but simplified for lower investment cost. The airCleanMAX30 will removal dust emission to below 30 mg/Nm3 and formaldehyde below 5 mg/Nm3. This system is prepared for easy upgrade to an airCleanMAX10 if regulations are changing towards stricter limits.

The lower operation and investment cost compared to a WESP (Wet Electrostatic Precipitator) is due to the fact that the airCleanMAX do not need the use of electricity to achieve the highest global environmental regulation. 

The airCleanMAX achieves  emissions levels because of  an innovated spraying tower, water treatment systems tailor made for MDF and  state of the art demistor technology.

An investment in a airCleanMAX is the most efficient investment for meeting all global environment regulation – all result guaranteed by Sunds Fibertech.

For further information, please contact us directly or via your local Sunds Fibertech representative.